28 July 2014

How to Stitch Katori Blouse with Heart Shape Neck?

How to Stitch Katori Blouse with Heart Shape Neck?

You have to follow this are steps:-
For stitching blouse you have mark on the paper and cut it, and this paper keep up side of the cloth and you have to cut.

A = Length (Shoulder to Waist) + 2 in
B = Breadth (Chest Circumference + 6 in) divided by 4
C = (Shoulder +2 in) divide by 2
D = Front Neck 5 in or as required, back neck 6 in or as required
E =  3 to 3.5 in
F =  E-1.25 in (Max 1.5 in)
G = Sleeve Length + 2 in
H = Sleeve Circumference + 2 in

Step 1:- First do the marking on the paper and cut it.
Step 2:- Now fold your cloth. Keep the paper on the cloth and do the marking and the cutting of the cloth. While cutting the paper take to cut it big do it seeing the figure.This piece you have to use for cutting.
Step 3:- Seeing the figure take your back side piece and do the cutting of back neck in heart shape, now take the cross piece and put there a paipin. Now keep this piece separate.
Step 4:- Take your sleeves and fold corner side 1inch and keep it separate.
Step 5:- Now take your piece no.1 and do the cross stitch (2and 1/2 inch to 0).Then seeing the figure attach it with piece no.2, now bottom side attach piece no.3, next attach button belt right side and button hole belt left. First keep this belt out side and stitch then turn belt inside and again stitch. Now join both the shoulder pieces and both the sides.
Step 6:- Now you have to make a belt which one length should be according to your waist and breadth should be 2inch, this belt you have to attach with your blouse waist side, first stitch out side and fold cloth inside and again stitch.
Step 7:- Now you have to mark inside your blouse according to your waist and chest measure, and stitch it.
Step 8:- Next d the joining of your sleeves..
Step 9:- Now you have to take cross piece length is according to your neck +1inch and breadth is 3/4inch.This piece you have to attach with your blouse neck side paipin (first you have to stitch out side and fold inside and again stitch) now make two doris whose breadth should be 3/4inch and length should be 10inch. Now seeing the figure attach the shoulder side.
Your blouse is ready!








Keep your cut paper pieces on the cloth draw,mark and cut it.



Back Piece

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

24 July 2014

How to Stitch Katori Blouse with Frill Neck & Frill Sleeve?

How to Stitch Katori Blouse with Frill Neck & Frill Sleeve?

First take the following measures:

A = Length (Shoulder to Waist) + 2 in
B = Breadth (Chest Circumference + 6 in) divided by 4
C = (Shoulder +2 in) divide by 2
D = Front Neck 5 in or as required, back neck 6 in or as required
E =  3 to 3.5 in
F =  E-1.25 in (Max 1.5 in)
G = Sleeve Length + 2 in
H = Sleeve Circumference + 4 in

Step 1:- First do the marking on the paper and do the cutting of it. Now take your back side paper piece and from centre side cut the paper seeing the figure and add 6 inch for frill. Now you take this piece and see the figure for how to make the frill, first you have to big stitch on full cloth next make zigzag and then pull your big one stitch thread and make knot there. Now this piece should be same which one you cut it from back side. Now join the cloth and put paipin seeing the figure.
Step 2:- Now fold your cloth and keep it on the cloth mark and cut it. while cutting the paper make one piece big (see the figure). This piece you have to use for cutting.
Step 3:- First you take your back side piece see the figure and cut do the frill on back neck, now take the cross piece and make the paipin and join it. Now you have to stitch back side 4inch bottom to up side(bottom side 1/2inch and up side should be 0) cross stitch, and keep it this piece separate.
Step 4:- Take your sleeve and do the frill seeing the figure fold courner side 1inch and keep it separate.
Step 5:- Now take your piece no.1 and do it cross stitch(2and 1/2 inch to 0).Then see the figure and attach with piece no.2, now bottom side attach piece no.3, next you have to attach button belt right side and button hole belt left.First keep this belt out side and stitch then turn belt inside and again stitch. Now you have to join both the shoulder and both the sides.
Step 6:- Now you have to make a belt which one length should be according to your waist and breadth should be 2inch, this one belt you have to attach with your blouse waist side, first stitch out side and fold cloth inside and again stitch.
Step 7:- Now you have to mark inside your blouse according to your waist and chest measure, and stitch it.
Step 8:- Next you have to join your sleeve.
Step 9:- Now you have to take cross piece length is according to your neck +1inch and breadth is 3/4inch.This piece you have to attach with your blouse neck side paipin (first you have to stitch out side and fold inside and again stitch) now make two doris whose breadth should be 3/4inch and length should be 10inch. Now seeing the figure attach the shoulder side.
Step 10:- Now attach button or hunk and make a hole.
Your blouse is ready!






       Keep your cut paper pieces on the cloth draw,mark and cut it.






Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.














23 July 2014

How to Stitch Katori Blouse with Back Frill Neck?

How to Stitch Katori Blouse with Back Frill Neck?

First take the following measures:

A = Length (Shoulder to Waist) + 2 in
B = Breadth (Chest Circumference + 6 in) divided by 4
C = (Shoulder +2 in) divide by 2
D = Front Neck 5 in or as required, back neck 6 in or as required
E =  3 to 3.5 in
F =  E-1.25 in (Max 1.5 in)
G = Sleeve Length + 2 in
H = Sleeve Circumference + 2 in

Step 1:- First do the marking on the paper and do the cutting of it. Now take your back side paper piece and from centre side cut the paper seeing the figure and add 6 inch for frill. Now you take this piece and see the figure for how to make the frill, first you have to big stitch on full cloth next make zigzag and then pull your big one stitch thread and make knot there. Now this piece should be same which one you cut it from back side. Now join the cloth and put paipin seeing the figure.
Step 2:- Now fold your cloth and keep it on the cloth mark and cut it. while cutting the paper make one piece big (see the figure). This piece you have to use for cutting.
Step 3:- First you take your back side piece see the figure and cut back neck, now take the cross piece and make the paipin and join it. Now you have to stitch back side 4inch bottom to up side(bottom side 1/2inch and up side should be 0) cross stitch, and keep it this piece separate.
Step 4:- Take your sleeve and fold courner side 1inch and keep it separate
Step 5:- Now take your piece no.1 and do it cross stitch(2and 1/2 inch to 0).Then see the figure and attach with piece no.2, now bottom side attach piece no.3, next you have to attach button belt right side and button hole belt left.First keep this belt out side and stitch then turn belt inside and again stitch. Now you have to join both the shoulder and both the sides.
Step 6:- Now you have to make a belt which one length should be according to your waist and breadth should be 2inch, this one belt you have to attach with your blouse waist side, first stitch out side and fold cloth inside and again stitch.
Step 7:- Now you have to mark inside your blouse according to your waist and chest measure, and stitch it.
Step 8:- Next you have to join your sleeve.
Step 9:- Now you have to take cross piece length is according to your neck +1inch and breadth is 3/4inch.This piece you have to attach with your blouse neck side paipin (first you have to stitch out side and fold inside and again stitch) now make two doris whose breadth should be 3/4inch and length should be 10inch. Now seeing the figure attach the shoulder side.
Step 10:- Now attach button or hunk and make a hole.
Your blouse is ready!






                  Keep your cut paper pieces on the cloth draw,mark and cut it.





Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.





12 July 2014

How to stitch Kurta-pyjama?

How to stitch Kurta-Pyjama?
First we will stitch Kurta:-
How to stitch a kurta ?
STEP1-: First you have to take the measures according to:-
          A: Length+2 inch
          B: Breadth(chest circumference)+6 divided by 4,
          C: Shoulder +1 inch divided by 2
          D: Sleeve length +2 
          E: Front neck 3or 4inch; back neck 2inch,
          F: Wrist circumference+1 and divided by 2,
          G: Neck measure+1/2 inch. 
STEP2-: Seeing the figure do the marking and the cutting of the cloth.
STEP3-: Front piece cut 3 inch (see the figure).
STEP4-: Now take small piece of cloth length5 inch and breadth4 inch and attach it frontside. Cut the               sides seeing the figure and stitch like shown. Put there button. Now join both shoulder sides. Next join both the sides.
STEP5-: Now see the figure and make the collar(take the 4inch breadth and length is equal to the measure of your neck+1/2 inch),now you see the figure and make it.
STEP6-: Collar stitch:-First stitch same measure of canvas on your cloth now turn it and then do a  simple stitch seeing the figure. Now attach the collar on your neck side.
STEP7-: Fold both bottom side 1/2 inch inside.
STEP8-: Seeing the figure take your sleeve and fold wrist side 1/2inch inside and attach the sleeve. Your collar Kurta is ready!






Second we will stitch pyjama:-
How to stitch pyjama?
Step1-Firstly we will take the following measures -
A-: Length(waist to ankle) + 4 inch
B-: Waist+8 divided by 4+1and 1/2 inch
C-: (see the figure) will be 2 inch usually(If your age is above 20) for kids take 1 and 1/2 inch only
D-: B (measure of waist. Here you DONT need to add 8 divide it by 4 and add 1and 1/2 inch ) divide 4 and add 2
Step2-You have to take the cloth and fold as per diagram.

MARKING AND CUTTING
Step3-Now we will mark on the cloth,see the diagram and cut it.

STITCHING
Step4-First we will fold 2 inch from down side.
Step5-Next up side fold 2 inch.
Step6-Now you have to join center pieces and stitch it.
Step7-Now you can put the elastic or dori in the waist side of the cloth. Step8-Enjoy your new pyjama.







Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

11 July 2014

How to Stitch Katori Blouse with Deep Dori Neck for Indian Ladies?

How to Stitch Katori Blouse with Deep Dori Neck for Indian Ladies?

You have to follow this are steps:-
For stitching blouse you have mark on the paper and cut it, and this paper keep up side of the cloth and you have to cut.

A = Length (Shoulder to Waist) + 2 in
B = Breadth (Chest Circumference + 6 in) divided by 4
C = (Shoulder +2 in) divide by 2
D = Front Neck 5 in or as required, back neck 6 in or as required
E =  3 to 3.5 in
F =  E-1.25 in (Max 1.5 in)
G = Sleeve Length + 2 in
H = Sleeve Circumference + 2 in

Step 1:- First do the marking on the paper and cut it.
Step 2:- Now you have to fold your cloth and keep it on the cloth mark and cut it.when you will cut the paper one piece you have to make it big (see the figure).This one piece you have to use for cutting.
Step 3:- First take your back side piece seeing the figure do the cutting back neck, now take the cross piece and make the loop and dori. Now stitch back side 4inch bottom to up side(bottom side 1/2inch and up side should be 0) cross stitch. Seeing the figure and put there paipin and make a loop and stitch there then make one dori which one you have to insert that one loop which one you stitch on your back side neck seeing the figure and insert your dori. Now you have  keep it this piece separate.
Step 4:- Take your sleeve and fold courner side 1inch and keep it separate.
Step 5:- Now take your piece no.1 and do it cross stitch(2and 1/2 inch to 0).Then see the figure and attach with piece no.2, now bottom side attach piece no.3, next you have to attach button belt right side and button hole belt left. First keep this belt out side and stitch then turn belt inside and again stitch. Now you have to join both the shoulder and both the sides.
Step 6:- Now you have to make a belt which one length should be accourding to your waist and breadth should be 2inch, this one belt you have to attach with your blouse waist side, first stitch out side and fold cloth inside and again stitch.
Step 7:- Now you have to mark inside your blouse according to your waist and chest measure, and stitch it.
Step 8:- Next you have to join your sleeve.
Step 9:- Now you have to take cross piece length is according to your neck +1inch and breadth is 3/4inch.This piece you have to attach with your blouse neck side paipin (first you have to stitch out side and fold inside and again stitch) now make two doris whose breadth should be 3/4inch and length should be 10inch. Now seeing the figure attach the shoulder side.
Step 10:- Now attach button or hunk and make a hole.
Your blouse is ready!








Keep your cut paper pieces on the cloth,draw,cut and stitch.




Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

7 July 2014

How to Stitch Simple Katori Blouse with Backside Dori Neck?

How to Stitch Simple Katori Blouse with Backside Dori Neck?

First take the following measures:

A = Length (Shoulder to Waist) + 2 in
B = Breadth (Chest Circumference + 6 in) divided by 4
C = (Shoulder +2 in) divide by 2
D = Front Neck 5 in or as required, back neck 6 in or as required
E =  3 to 3.5 in
F =  E-1.25 in (Max 1.5 in)
G = Sleeve Length + 2 in
H = Sleeve Circumference + 2 in

Step 1:- First do the marking on the paper and do the cutting of it.
Step 2:- Now fold your cloth and keep it on the cloth mark and cut it. when you will cut the paper make one piece big (see the figure).This piece you have to use for cutting.
Step 3:- First you take your back side piece see the figure and cut back neck, now take the cross piece and make the dori and joint it. Now you have to stitch back side 4inch bottom to up side(bottom side 1/2inch and up side should be 0) cross stitch, and keep it this piece separate.
Step 4:- Take your sleeve and fold courner side 1inch and keep it separate
Step 5:- Now take your piece no.1 and do it cross stitch(2 and 1/2 inch to 0).Then see the figure and attach with piece no.2,now bottom side attach piece no.3, next you have to attach button belt right side and button hole belt left.First keep this belt out side and stitch then turn belt inside and again stitch. Now you have to join both the shoulder and both the sides.
Step 6:- Now you have to make a belt which one length should be accourding to your waist and breadth should be 2inch, this one belt you have to attach with your blouse waist side, first stitch out side and fold cloth inside and again stitch.
Step 7:- Now you have to mark inside your blouse according to your waist and chest measure, and stitch it.
Step 8:- Next you have to join your sleeve.
Step 9:- Now you have to take cross piece length is according to your neck +1inch and breadth is 3/4inch.This piece you have to attach with your blouse neck side paipin (first you have to stitch out side and fold inside and again stitch) now make two doris whose breadth should be 3/4inch and length should be 10inch. Now seeing the figure attach the shoulder side.
Step 10:- Now attach button or hunk and make a hole.
Your blouse is ready!






Keep your cut paper pieces on the cloth,draw,cut and stitch.







Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

6 July 2014

How to Stitch Indian Ladies Katori Blouse with Frill Sleeve?

How to Stitch Indian Ladies Katori Blouse with Frill Sleeve?

First take the following measures:

A = Length (Shoulder to Waist) + 2 in
B = Breadth (Chest Circumference + 6 in) divided by 4
C = (Shoulder +2 in) divide by 2
D = Front Neck 5 in or as required, back neck 6 in or as required
E =  3 to 3.5 in
F =  E-1.25 in (Max 1.5 in)
G = Sleeve Length + 2 in
H = Sleeve Circumference + 4 in

Step 1:- First do the marking on the paper and do the cutting of it.
Step 2:- Now fold your cloth and keep it on the cloth mark and cut it. when you will cut the paper make one piece big (see the figure).This piece you have to use for cutting.
Step 3:- First you take your back side piece see the figure and cut back neck. Now you have to stitch back side 4inch bottom to up side(bottom side 1/2inch and up side should be 0) cross stitch, and keep it this piece separate.
Step 4:- Take your sleeve and fold courner side 1inch and keep it separate
Step 5:- Now take your piece no.1 and do it cross stitch(2and 1/2 inch to 0).Then see the figure and attach with piece no.2,now bottom side attach piece no.3, next you have to attach button belt right side and button hole belt left.First keep this belt out side and stitch then turn belt inside and again stitch. Now you have to join both the shoulder and both the sides.
Step 6:- Now you have to make a belt which one length should be accourding to your waist and breadth should be 2inch, this one belt you have to attach with your blouse waist side, first stitch out side and fold cloth inside and again stitch.
Step 7:- Now you have to mark inside your blouse according to your waist and chest measure, and stitch it.
Step 8:- Next you have to join your sleeve.
Step 9:- Now you have to take cross piece length is according to your neck +1inch and breadth is 3/4inch.This piece you have to attach with your blouse neck side paipin (first you have to stitch out side and fold inside and again stitch).
Step 10:- Now attach button or hunk and make a hole.
Your blouse is ready!






Keep your cut paper pieces on the cloth draw, mark and cut it.



           


Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.