30 January 2015

How to stitch Simple lining Blouse?

How to stitch Simple lining Blouse?
You have to take one cloth for lining.
STEP1:- Length+2 inch
STEP2:- Breadth (chest circumference)+6 divided by 4+1
STEP3:- Shoulder -1divided by 2
STEP4:- Sleeve length+2inch and breadth(original chest circumference)divided by 5+1/2 inch
STEP5:- Waist divided by 4+1/2inch.
Seeing the figure do the marking and the cutting of the both cloth and join all the same pieces.
1: First you have to fold your sleeve 1inch inside join the under arm and keep it separate.
2: Seeing the figure stitch where is mark*. You have to stitch which no. is there start and ending point                   will be 0, see the figure and do it.
3: Now you have to attach the shoulder and join front side huck and holl belt, both belt breadth should
be 3inch and length will be as your front piece +2and 1/2 inch. Attach there both belt(see the figure and do it)
4:Now you have to attach neck side cross piece and put paipin on full neck.
5:Now you have to join both side arm.Next you have to attach sleeves,and in last you have to put button and make hole.
Your simple blouse is ready!




Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

28 January 2015

How to stitch Simple lining Blouse for old lady?

How to stitch Simple lining Blouse for old lady?
You have to take one cloth for lining.
STEP1:- Length+2 inch
STEP2:- Breadth (chest circumference)+6 divided by 4+1
STEP3:- Shoulder -1divided by 2
STEP4:- Sleeve length+2inch and breadth(original chest circumference)divided by 5+1/2 inch
STEP5:- Waist divided by 4+1/2inch.
Seeing the figure do the marking and the cutting of the both cloth and join all the same pieces.
1: First you have to fold your sleeve 1inch inside join the under arm and keep it separate.
2: Seeing the figure stitch where is mark*. You have to stitch which no. is there start and ending point                   will be 0, see the figure and do it.
3: Now you have to attach the shoulder and join front side huck and holl belt, both belt breadth should
be 3inch and length will be as your front piece +2and 1/2 inch. Attach there both belt(see the figure and do it)
4:Now you have to attach neck side cross piece and put paipin on full neck.
5:Now you have to join both side arm.Next you have to attach sleeves,and in last you have to put button and make hole.
Your simple blouse is ready!




Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.




14 January 2015

How to stitch Salwar-Kurti with 3/4 sleeve?

How to stitch Salwar-Kurti with 3/4 sleeve?
Measurement of Kurti-
             Length(shoulder to Knee)+2inch
             Shoulder +1inch
             Breadth(chest circumference)+6 divided by 4
             Front neck 5inch or as long as your wish
             Back neck 3inch or as long as your wish
             Sleeve length +2inch,
             Sleeve circumference +2inch, (sleeve arm side will be chest circumference divided by 4 -1)
Step2:- Now seeing the figure do the marking and the cutting of the cloth. First fold bottom side 1/2inch, at the sides also fold inside 1/2inch. Sleeve side also fold inside 1inch. Both neck fold 1/2inch inside. Now join both the shoulder pieces, next sides and then attach the sleeves.
Your kurti is ready!
Measurement of salwar:-
            Length(waist to ankle) +4inch
            First divide the measurement of length in 2 parts:
                     1-upper part waist to hip 5inch +2inch (if you are fat then take 8 to 10inch)
                     2-Lower part hip to ankle +2inch
           Waist +6 divide by 4
           Lower part hip+8 inch.
Seeing the figure do the marking and the cutting of the cloth.
            First fold bottom side 1and  1/2 inch, waist side fold 1inch for inserting a dori, Next make the frill on hip side(where you have taken  8inch extra), Now join both the lower parts separately and join the centre piece.
Your Salwar is ready!
Your salwar kurti is ready!





Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

5 January 2015

How to Stitch Sleeveless Katori Blouse?

How to Stitch Sleeveless Katori Blouse?

For stitching blouse first do the marking on the paper and do the cutting of it. Keep this paper upside the piece of the cloth on which you will do marking and cutting.
A = Length (Shoulder to Waist) + 2 in
B = Breadth (Chest Circumference + 6 in) divided by 4
C = (Shoulder +4 in) divided by 2
D = Front Neck 5 in or as required, back neck 6 in or as required
E =  3 to 3.5 in
F =  E-1.25 in (Max 1.5 in)

For the stitching:
Step 1:- First make a stitch at back side 4inch bottom to up side (bottom side 1/2inch and up side should be 0) cross stitch, and keep it this piece separate. (DO REFER TO THE FIGURE)
Step 2:- Now take your piece no.1 and make a cross stitch (2 and 1/2 inch to 0). Then seeing the figure attach with piece no:2. Now at bottom side attach piece no.3. Next attach your button belt right side and button hole belt left side. For this first keep the belt outside and make a stitch then turn belt inside and stitch again. Now join both the shoulder pieces.
Step 3:- Now take cross piece which has length is according to your sleeves side and breadth to be 1.5inch. Do the paipin work on your sleeves side and join both the sides.
Step 4:- Now you have to make a belt which has length according to your waist+1inch and breadth should be 2inch, attach this belt with your blouse at waist side, first stitch outside and fold cloth inside and stitch again.
Step 5:-  For the complete fitting of your blouse according to requirements do the marking inside and make a stitch.
Step 6:- Now take a cross piece of which length is according to  measurement of your neck +1inch and breadth is 3/4inch. Attach this piece with your blouse at neck side. Do the paipin work here (do the external stitching first the make a fold internally and do an internal stitch.)
Step 7:- Now attach buttons or hooks and make holes for them.
Your sleeveless Katori blouse is ready!










Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.