How to stitch Colourful Rubber Band with waste cloth for ponytail?

How to stitch Colourful Rubber Band with waste cloth for ponytail?
For stitching a rubber band you need
colourful cloth 10inch by 3inch
cotton elastic length: 6inch
                    breadth: 1/2 inch.
Seeing the figure do the marking and the cutting of the cloth and stitch it. Now insert an elastic attach both the corners and join both the sides.
Your Colourful Rubber Band is ready!

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

How to stitch a Simple Short in simple method?

How to stitch a Simple Short in simple method?

STEP1-: First take the measures according to:
               length:   Side length (waist to as long as you need)+2 inch.
               breadth: Waist+10 inch divided by 4.
               Bottom side circumference+1inch.
               *If your age is more then 10 years then you have to mark 2and 1/2 inch.
                Otherwise 1and1/2inch.*(see this mark in figure)

STEP2-: Seeing the figure cut the cloth.

STEP3-: Now fold1/2 inch from bottom side .Next fold waist side 1 inch(for inserting  an elastic).
               Now join both the pieces.
               Your Short is ready!

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

How to stitch simple Brassier (Front Button) ?

How to stitch simple Brassier (Front Button) ?

Step1-:A: Front length+1inch
            B: Back length+2inch
            C: Waist+4 divided by 4
            D: Chest circumference+6 and divided by 4
            E: Front neck 6inch and back neck 8inch or your wish.

Step2-: First take the measurement then do the marking and the cutting of the cloth.

Step3-: Now fold all the corners, then front and back side stitch inside. Now join front side belt.

Step4-: Next join the shoulder and stitch the sides.

Step5-: Now put the buttons and make a hole.

Your Brassier is ready!

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes
                                                

How to stitch chaniya-choli with long dori back neck and long dori sleeve?

How to stitch chaniya-choli with long dori back neck and long dori sleeve?

For stitching chaniya-choli you need 5 meter.

STEP1-: First take the measures of Chaniya & Choli:

Measures for Choli:- 
A = Length (From Shoulder to Waist) + 2 in
B = Breadth(Chest circumference ) + 2 in
Front neck: 4 in
Back neck: 2 in
Shoulder = Shoulder to Shoulder + 2 in dived by 2

Measures for the Chaniya:-
Chaniya Waist Size = Actual Waist Size + 2 in
Chaniya Length = Length (From Waist to Ankle)  + 4 in

Measure for the sleeves:- See the figure.

STEP2-: Seeing the figure, mark and cut the cloth.

Choli Stitching:
First fold 1/2 in from both the sides. Now stitch Back side Doori Neck.

First take your back side part of the neck. Seeing the figure do the cutting and make the loop and cut 1inch small size then join small loop.

How to make a loop?

First take cross pieces of 1inch breadth cloth and 12 inch long.

Now fold and make it half inch breadth and stitch, after stitching turn the cloth piece.

Now cut 1inch small pieces seeing the figure join it and your loop is ready.

Now you have to make it same dori length should be accourding to your back length how much you cut into 2.

Now seeing the figure insert your dori next join the shoulder.
Now stitch Long Dori Sleeve?
Seeing the figure and cut the cloth and join a small loop.

How to make a loop?
First you have to take cross pieces of 1inch breadth cloth and 12 inch long.
You have to fold and make it half inch breadth and stitch, after stitching you have to turn the cloth piece now cut 1and1/2 inch small pieces seeing the figure join your loop is ready.
Now make a same dori length should be according to your sleeve length into 2.
Now seeing the figure insert your dori, then attach the sleeves on your dress.
Your Long Dori Sleeve is ready!
and see the figure and attach dori sleeve.Your Choli is ready!!

Chaniya Stitching:
Seeing the figure fold 1 in from bottom side. Now fold waist side 2 in (insert a dori). Now join the sides.
Your Chaniya is ready!

Congratulations!!! Your Chaniya Choli is ready!!!

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

How to stitch simple petticoat (saree inner)?

How to stitch simple petticoat (saree inner)?
Length (waist-ankle)+1/2inch.
Breadth (waist) into 2+10 inch.
Hip+10 inch.

One long cloth piece:- Breadth will be 5inch and length will be according to your waist+2inch. Now fold 1/2 inch both side and keep it separate.

Now do the marking and the cutting of the cloth.

Stitch bottom side 1inch inside and upper side make the frill there gap will be 1inch each, do it on the full cloth waist side.
Now join waist side that one cloth piece which one you kept separate.
Next join side and insert a dori.
Now your frill petticoat (saree inner) for fat lady is ready!

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

How to stitch a Short (For girls)?

How to stitch a Short (For girls)?

STEP1-: First take the measures according to:
               length:   Side length (waist to as long as you need)+2 inch.
               breadth: Waist+10 inch divided by 4.
               Bottom side circumference+1inch.
               *If your age is more then 10 years then you have to mark 2and 1/2 inch.
                Otherwise 1and1/2inch.*(see this mark in figure)

STEP2-: Seeing the figure cut the cloth.

STEP3-: Now fold1/2 inch from bottom side .Next fold waist side 1 inch(for inserting  an elastic).
               Now join both the pieces.
               Your Short is ready!

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

How to stitch a bloomer (For girls)?

How to stitch a bloomer (For girls)?
STEP1:-First take the measurements:
A: Length(waist to up to knee)+4 inch
B: Breadth(waist circumference)+2 inch and divided by 4
C: Hip+2inch and divided by 4
D: 1inch broad cotton elastic according to your measure of B,
     1/2 inch broad cotton elastic according to your measure of up to knee.
STEP2:- Seeing the figure do the marking and the cutting of the cloth.
STEP3:- Next for stitching first fold 1inch bottom side and insert there 1/2 inch broad
elastic then fold waist side 2inch and insert there 1inch broad elastic.
STEP3:-Seeing the figure join bottom to up side separate and next join upper side.
Your Bloomer is ready!

 Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

   

How to stitch dori neck and long dori sleeve in Salwar-suit?

How to stitch dori neck  and long dori sleeve in Salwar-suit?
Measurement of Kurti-
             Length(shoulder to Knee)+2inch
             Shoulder +1inch
             Breadth(chest circumference)+6 divided by 4
             Front neck 5inch or as long as your wish
             Back neck 3inch or as long as your wish
             Sleeve length +2inch,
             Sleeve circumference +2inch, (sleeve arm side will be chest circumference divided by 4 -1)

Step2:- Now seeing the figure do the marking and the cutting of the cloth.

 First fold bottom side 1/2inch, at the sides also fold inside 1/2inch.
 How to stitch Long Dori Sleeve?

Seeing the figure and cut the cloth and join a small loop.
How to stitch Long Dori Sleeve and make a loop?

First you have to take cross pieces of 1inch breadth cloth and 12 inch long.
You have to fold and make it half inch breadth and stitch, after stitching you have to turn the cloth piece now cut 1and1/2 inch small pieces seeing the figure join your loop is ready.

Now make a same dori length should be according to your sleeve length into 2.
Now seeing the figure insert your dori, then attach the sleeves on your dress.
Your kurti is ready!

Measurement of salwar:-
            Length(waist to ankle) +4inch
            First divide the measurement of length in 2 parts:
                     1-upper part waist to hip 5inch +2inch (if you are fat then take 8 to 10inch)
                     2-Lower part hip to ankle +2inch
           Waist +6 divide by 4
           Lower part hip+8 inch.
Seeing the figure do the marking and the cutting of the cloth.
            First fold bottom side 1and  1/2 inch, waist side fold 1inch for inserting a dori, Next make the frill on hip side(where you have taken  8inch extra), Now join both the lower parts separately and join the centre piece.
Your Salwar is ready!

Your salwar kurti is ready!

Now stitch Back side Doori Neck?
First take your back side part of the neck. Seeing the figure do the cutting and make the loop and cut 1inch small size then join small loop.
How to make a loop?
First take cross pieces of 1inch breadth cloth and 12 inch long.
Now fold and make it half inch breadth and stitch, after stitching turn the cloth piece.
Now cut 1inch small pieces seeing the figure join it and your loop is ready.
Now you have to make it same dori length should be accourding to your back length how much you cut into 2.
Now seeing the figure insert your dori, then attach the cloth part on your dress or anywhere you like.
Your Back side dori neck is ready!

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

How to stitch a Short (For 8-15 year girl)?

How to stitch a Short (For 8-15 year girl)?

STEP1-: First take the measures according to:
               length:   Side length (waist to as long as you need)+2 inch.
               breadth: Waist+10 inch divided by 4.
               Bottom side circumference+1inch.
               *If your age is more then 10 years then you have to mark 2and 1/2 inch.
                Otherwise 1and1/2inch.* (see this mark in figure)

STEP2-: Seeing the figure cut the cloth.

STEP3-: Now fold1/2 inch from bottom side .Next fold waist side 1 inch(for inserting  an elastic).
               Now join both the pieces.
               Your Short is ready!

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

How to stitch frill petticoat (saree inner)?

How to stitch frill petticoat (saree inner)?
First take the measurement:-
1:-Length (waist-ankle)+1/2inch.
2:-Breadth (waist) into 2+10 inch.
3:-Hip+10 inch.

One long cloth piece:- Breadth will be 5inch and length will be according to your waist+2inch. Now fold 1/2 inch both side and keep it separate.

Now do the marking and the cutting of the cloth.

Stitch bottom side 1inch inside and upper side make the frill there gap will be 1inch each, do it on the full cloth waist side.
Now join waist side that one cloth piece which one you kept separate.
Next join side and insert a dori.
Now your frill petticoat (saree inner)is ready!

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

How to Stitch Sleeveless Chaniya Choli? (for 10-12 years old baby)

How to Stitch Sleeveless Chaniya Choli? (for 10-12 years old baby)

For 10 year baby you have to take the 3 meter long cloth.

STEP1-: First take the measures of Chaniya & Choli:

Measures for Choli:- 
A = Length (From Shoulder to Waist) + 2 in
B = Breadth(Chest circumference ) + 2 in
Front neck: 4 in
Back neck: 2 in
Shoulder = Shoulder to Shoulder + 4 in dived by 2

Measures for the Chaniya:-
Chaniya Waist Size = Actual Waist Size + 2 in
Chaniya Length = Length (From Waist to Ankle)  + 4 in

STEP2-: Seeing the figure, mark and cut the cloth.

Choli Stitching:
First fold 1/2 in from both the sides. Next join both shoulder pieces.Seeing the figure join a paipin on front neck and back neck.Now you have to stitch paipin on shoulder side.Now join both the sides.
Your Choli is ready!        

Chaniya Stitching:
Seeing the figure fold 1 in from bottom side. Now fold waist side 2 in (insert a dori). Now join the sides.
Your Chaniya is ready!

Congratulations!!! Your Chaniya Choli is ready!!!

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

How to stitch a Short?

How to stitch a Short?

STEP1-: First take the measures according to:
               length:   Side length (waist to as long as you need)+2 inch.
               breadth: Waist+10 inch divided by 4.
               Bottom side circumference+1inch.
               *If your age is more then 10 years then you have to mark 2and 1/2 inch.
                Otherwise 1and1/2inch.*(see this mark in figure)

STEP2-: Seeing the figure cut the cloth.

STEP3-: Now fold1/2 inch from bottom side .Next fold waist side 1 inch(for inserting  an elastic).
               Now join both the pieces.
               Your Short is ready!

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

How to Stitch two colours Katori Blouse?

How to Stitch two colours Katori Blouse?

For 34/36 inch chest take two colours of cloth of 60cm. (front piece and sleeve) and 40cm.(back piece and paipin).

For stitching blouse first do the marking and the cutting on a paper. And use this paper for keeping on the cloth and cutting it.

A = Length (Shoulder to Waist) + 2 in
B = Breadth (Chest Circumference + 6 in) divided by 4
C = (Shoulder +2 in) divide by 2
D = Front Neck 5 in or as required, back neck 6 in or as required
E =  3 to 3.5 in
F =  E-1.25 in (Max 1.5 in)
G = Sleeve Length + 2 in
H = Sleeve Circumference + 2 in

Step 1:- First do the marking and cutting on a paper. take two paper pieces according to the blouse.
Step 2:- Now fold your cloth and keep it on the cloth and do the marking and cutting of it (you have to take 60cm piece and cut front piece). For back piece and half sleeves you have to use 40cm piece.
Step 3:- First take your back side piece seeing the figure do the cut and join three piece
Step 4:- Take your paper cut sleeve and see the figure and cut into two colour. Now you have to join three pieces, fold courner side 1inch and keep it separate.
Step 5:- Now take your piece no.1 and do it cross stitch(2and 1/2 inch to 0).Then see the figure and attach with piece no.2, now bottom side attach piece no.3, next you have to attach button belt right side and button hole belt left. First keep this belt out side and stitch then turn belt inside and again stitch. Now you have to join both the shoulder and both the sides.
Step 6:- Now you have to make a belt which one length should be accourding to your waist+1inch and breadth should be 2inch, this one belt you have to attach with your blouse waist side, first stitch out side and fold cloth inside and again stitch.
Step 7:- Now you have to mark inside your blouse according to your waist and chest measure, and stitch it extra inch.
Step 8:- Next you have to join your sleeve.
Your blouse is ready!

                  Keep your cut paper pieces on the cloth draw,mark and cut it.

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.