30 June 2015

How to stitch a Simple Dori Legging?

How to stitch a Simple Dori Legging?

STEP1:- Length(waist to ankle)+3/4inch
STEP2:- Breadth(waist circumference)+6inch and the total divided by 4
STEP3:- Hip+4inch and divided by 4
STEP4:- Knee circumference+ 1inch
STEP5:- Ankle circumference+2inch

Seeing the figure do the marking and the cutting of the cloth.
For the stitching:
1: Fold 1/2 inch from bottom and insert an elastic or a dori.
2: Join upper piece from waist to centre 1 side only.
Now take cotton elastic 1inch breadth and length (your original waist - 2inch).
For stitching the elastic first pull the elastic and stitch.
(Note: while pulling the elastic keep your needle up side because the needle can break).

Seeing the figure stitch from waist to centre. Next stitch  from centre to bottom.

Congratulations! Your Legging is ready!





Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She has completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

29 June 2015

How to stitch Dori and Loops for a blouse?

How to stitch Dori and Loops for a blouse?

Stitching a dori for the blouse is very simple.

Step 1: First take the cross pieces of your blouse piece.
Step 2: Now cut these pieces and seeing the figure join them. Now you will get a long cloth.
Step 3: Now fold the cloth and make a stitch.
Step 4: Now turn the cloth piece inside out.

Congratulations! Your Dori and Loops is ready!



  1. Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She has completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog must not be used for commercial purposes or for publishing in other electronic media purposes.

26 June 2015

How to stitch Dori for blouse ?

How to stitch dori for blouse?

Stitching a dori for the blouse is very simple.

Step 1: First take the cross pieces of your blouse piece.
Step 2: Now cut these pieces and seeing the figure join them. Now you will get a long cloth.
Step 3: Now fold the cloth and make a stitch.
Step 4: Now turn the cloth piece inside out.

Congratulations! Your Dori is ready!



  1. Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog must not be used for commercial purposes or for publishing in other electronic media purposes.

25 June 2015

How to Stitch Sleeveless Katori Blouse with Checks Design?

How to Stitch sleeveless Katori Blouse with Checks Design?

First take the following measures:

A = Length (Shoulder to Waist) + 2 in
B = Breadth (Chest Circumference + 6 in) divided by 4
C = (Shoulder +4 in) divide by 2
D = Front Neck 5 in or as required, back neck 6 in or as required
E =  3 to 3.5 in
F =  E-1.25 in (Max 1.5 in)

Step 1:- First do the marking on the paper the cutting of it.

Step 2:- Now fold your cloth and keep it on the cloth mark and cut it, while cutting the paper take one piece big (do this seeing the figure). Use this piece for cutting.

Step 3:- Now take your back side piece seeing the figure and make the checks. Now stitch out side line and make the checks. Now you have to stitch back side 4inch bottom to up side (bottom side 1/2inch and up side should be 0) cross stitch, and keep it this piece separate.

Step 4:-Now take your piece no.1 and do the cross stitch (2and 1/2 inch to 0).Then seeing the figure and attach with piece no.2, now bottom side attach piece no.3, next you have to attach button belt right side and button hole belt left. First keep this belt out side and stitch then turn belt inside and stitch again. Now join both the shoulder and both the sides.

Step 6:- Now make a belt which one length should be according to your waist and breadth should be 2inch, this belt you have to attach with your blouse's waist side, first stitch out side and fold cloth inside and again stitch.

Step 7:- Now mark inside your blouse according to your waist and chest measure, and stitch it.

Step 8:- Next you have put paipin on sleeve side.

Step 9:- Now take cross piece of length according to your neck +1inch and breadth is 3/4inch.This piece you have to attach with your blouse neck side paipin (first you have to stitch out side and fold inside and stitch again). Now seeing the figure attach the shoulder side.

Step 10:- Now attach button or hook and make a hole.

Your blouse is ready!







Keep your cut paper pieces on the cloth draw,mark and cut it.







     


Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.