How to Stitch Simple Sleeveless Collar Top ?

How to Stitch Simple Sleeveless Collar Top?

STEP1-: First take the following measures:
A: Length (shoulder to how long you need)+2inch.
B: Chest circumference divided by 4+1inch.
C: Neck:
               Front neck: 3inch(your wish)
               Back neck: 1inch
D: Shoulder to shoulder +4 and divid by 2

STEP2-: Seeing the figure fold your cloth do the marking and the cutting of the cloth.

STEP3-: For making collar see the figure and do it. First take bottom side two cloth piece now upper side canvas then stitch next turn it that time canvas should be centre side. Now again out side stitch, Your collar is ready. Now keep it separate.

STEP4-: Fold both bottom side 1/2inch inside.

STEP5-: Now join both the shoulder sides.Stitch there paipin.

STEP6-: Next attach collar on neck side.

STEP7-: Now join both the sides.

Your Simple Sleeveless Collar Top is ready!

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

How to stitch a baby's frock (Zabala)?

How to stitch a baby's frock (Zabala)?

  Selection of cloth, size & initial folds:
    Step1: Select a cloth of your choice. If you want overall dimension of 20in x 30 in then you need to have cloth of actual dimension: Length-20 in + 1 in extra x Width 30 in + 5 in extra). 
    Step2: First fold the cloth in middle of the length (Size after first fold: 10 in + 0.5 in extra x 30 in + 5 in extra). 
    Step3: Fold cloth in the middle of the width (Size after 2nd fold: 10 in + 0.5 in extra x 15 in + 2.5 in extra)
    Step4: Next step is marking for stitching baby's frock. 

  

    Marking on the folded cloth:

I    Step1: If our A (measure -shoulder to knee) is 10 in then add 1/2 in extra while marking on the cloth. 

     Step2: Next mark 10 in + 1/2 in extra (of measure A ) 
     Step3: If our B (measure-chest) is of 15 inches then by adding 5 inches we get 20 inches. So the breadth of our cloth will be 20 inch. 
     Step4: For arm we will divide its (chest's) measure with 5. C = 15/5, C=3 in. For D we will divide the measure of A with 2 and hence D = 10/2, D = 5 in. 
     Step5: Take actual measurement of front neck size (E) and back neck size (F). Basically E & F dimensions are based on individual's comfort & choice. 
   
   Please refer the below diagram for marking & cutting:

•     A :- Measure of shoulder to knee + take 1/2 inch extra (for the folding) 
•     B :- Measure of chest and 5 inches extra
•     C :- Measure of arm and 5 inches extra
•     D :- Half of the measure (of A ) 
•     E :- Measure of the frontier neck  
•     F :- Measure of backside neck

  Cutting of the cloth:

    New users can make use of paper instead of cloth for sample cutting purpose in order to avoid cutting from wrong side. 

     Step1: Please review and check all of above steps. 

     Step2: Cut the cloth as indicated in figure

     Step3: After cutting the cloth it is ready to get stitched.

    Stitching:

    Step1: For stitching fold neck sides (1/4 in) and stitch

    Step2: Fold arm side (1/4 in) and stitch

    Step3: Fold bottom of the frock and stitch

    Step4: Now join the sides.

    
    Congratulations: Now, your baby's frock is ready.

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. 

Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog must not be used for commercial purposes or for publishing in other electronic media purposes.

How to stitch Night Short with easy way?

How to stitch Night Short with easy way?

STEP1-: First take the measures according to:
               length:   Side length (waist to as long as you need)+2 inch.
               breadth: Waist+10 inch divided by 4.
               Bottom side circumference+1inch.
               *If your age is more then 10 years then you have to mark 2and 1/2 inch.
                Otherwise 1and1/2inch.*(see this mark in figure)

STEP2-: Seeing the figure fold your cloth and cut the cloth.

STEP3-: Now fold1/2 inch from bottom side .Next fold waist side 1 inch(for inserting  an elastic).
               Now join both the pieces.
               Your Short is ready!

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

How to Stitch Round Neck Sleeveless Top with dori on shoulder ?

How to Stitch Round Neck Sleeveless Top with dori on shoulder ?

STEP1-: First take the following measures:
A: Length (shoulder to how long you need)+4inch.
B: Chest circumference divided by 4+1/2inch.
C: Neck:
               Front neck: 5inch
               Back neck: 3inch
D: Shoulder to shoulder +2 divided by 2

STEP2-: Seeing the figure and fold your cloth, do the marking and the cutting of the cloth.

STEP3-: Fold both neck side 1inch, then insert there dori (for inserting a dori use a crosspiece fold cross piece and make dori), then fold both bottom side 1/2inch inside.

STEP5-: Now you have to join both shoulder side.

STEP6-: Now join both the sides.

Your Sleeveless Dori neck Top is ready!

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

How to Stitch Round Neck Top with dori on shoulder ?

How to Stitch Round Neck Top with dori on shoulder ?

STEP1-: First take the following measures:
A: Length (shoulder to how long you need)+4inch.
B: Chest circumference divided by 4+1/2inch.
C: Neck:
               Front neck: 5inch
               Back neck: 3inch
D: Shoulder to shoulder +2 divided by 2
E: Sleeve Length +1 inch
F: Sleeve Breadth (chest circumference divided by 4 -1)

STEP2-: Seeing the figure fold your cloth, do the marking and the cutting of the cloth.

STEP3-: Fold both neck side 1inch, then insert there dori (for inserting a dori use a crosspiece fold cross piece and make dori), then fold both bottom side 1/2inch inside.

STEP5-: Now you have to join both shoulder side.

STEP6-: Seeing the figure do the marking and the cutting of the sleeves. Now attach the sleeves on your top.

STEP7-: Now join both the sides.

Your Dori neck Top is ready!

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

How to Stitch Lining Katori Dori Blouse with Heart Shape Back ?

How to Stitch Lining Katori Dori Blouse with Heart Shape Back?

For lining blouse you need two blouse pieces one blouse piece for out side and one more blouse piece for lining (inside lining cloth)  
First take the following measures:

A = Length (Shoulder to Waist) + 2 in
B = Breadth (Chest Circumference + 6 in) divided by 4
C = (Shoulder +2 in) divide by 2
D = Front Neck 5 in or as required, back neck 6 in or as required
E =  3 to 3.5 in
F =  E-1.25 in (Max 1.5 in)
G = Sleeve Length + 2 in
H = Sleeve Circumference + 2 in

Step 1:- First do the marking on the paper and do the cutting of it.
Step 2:- Now fold your cloth and keep it on the cloth mark and cut it. when you will cut the paper make one piece big (see the figure).This piece you have to use for cutting. Now join both the cloth pieces(outside cloth and inside cloth).
Step 3:- First take your back side piece and seeing the figure cut backside heart shape neck. Now first stitch back side fold your back side piece from centre . Centre to left and centre to right 3and 1/2 inch mark and stitch, 4inch bottom to up side (bottom side 1/2inch and up side should be 0) cross stitch.  Now join both the back piece.Now keep this piece separate.
Step 4:- Take your sleeve and join both the pieces(outside side and inside)now fold corner side 1inch and keep it separate.
Step 5:- Now take your same piece and first join together. Now take your piece no.1 and do it cross stitch(2and 1/2 inch to 0).Then seeing the figure attach with piece no.2, now bottom side attach piece no.3, next attach button belt at the right side and button hole belt left. First keep this belt outside and stitch then turn belt inside and stitch again. Now join both the shoulder pieces and both the sides.
Step 6:- Now make a belt of which length should be according to your waist and breadth should be 2inch. Attach this belt with your blouse at waist side, first stitch outside and fold the cloth inside and stitch again.
Step 7:- Now do the marking inside your blouse according to your waist and chest measure, and stitch it.
Step 8:- Next join your sleeves.
Step 9:- Now take cross piece of length which is according to your neck +1inch and breadth is 3/4inch. Attach this piece with your blouse at neck side paipin or hemming (first you have to stitch outside, fold inside and stitch again).
Step 10:- Now attach button or hook and make a hole.
Step 11:- Now stitch dori with cross pieces and attach on your blouse at back side.
Your blouse is ready!

Keep your paper pieces cuttings on the cloth. Draw marking lines on cloth and carefully cut the cloth.

   

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras
Institute of Tailoring. 

Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog must not be used for commercial purposes or for publishing in other electronic media purposes.