Cutting and Stitching of simple Princess cut blouse?

Cutting and Stitching of simple Princess cut blouse?

For the stitching of Princess cut blouse, following are the measurement required:-

STEP1:- Length+2 inch
STEP2:- Breadth (chest circumference)+6 divided by 4+1
STEP3:- Shoulder -1divided by 2
STEP4:- Sleeve length+2inch and breadth(original chest circumference)divided by 5+1/2 inch
STEP5:- Waist divided by 4+1/2inch.

Seeing the figure do the marking and the cutting of the cloth.
1: First you have to fold your sleeve 1inch inside join the under arm and keep it separate.

2: Seeing the figure stitch where is mark*. You have to stitch which no. is there start and ending point                   will be 0, see the figure and do it.

3: Now you have to attach the shoulder and join front side huck and hold belt, both belt breadth should be 3inch and length will be as your front piece +2and 1/2 inch. Attach there both belt(see the figure and do it).

4:Now you have to attach neck side cross piece and put paipin on full neck.

5:Now you have to join both side arm.Next you have to attach sleeves,and in last you have to put button and make hole.

Your Princess cut blouse is ready!

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

How to stitch simple Princess cut blouse?

How to stitch simple Princess cut blouse?

For the stitching of Princess cut blouse, following are the measurement required:-

STEP1:- Length+2 inch
STEP2:- Breadth (chest circumference)+6 divided by 4+1
STEP3:- Shoulder -1divided by 2
STEP4:- Sleeve length+2inch and breadth(original chest circumference)divided by 5+1/2 inch
STEP5:- Waist divided by 4+1/2inch.

Seeing the figure do the marking and the cutting of the cloth.
1: First you have to fold your sleeve 1inch inside join the under arm and keep it separate.

2: Seeing the figure stitch where is mark*. You have to stitch which no. is there start and ending point                   will be 0, see the figure and do it.

3: Now you have to attach the shoulder and join front side huck and hold belt, both belt breadth should be 3inch and length will be as your front piece +2and 1/2 inch. Attach there both belt(see the figure and do it).

4:Now you have to attach neck side cross piece and put paipin on full neck.

5:Now you have to join both side arm.Next you have to attach sleeves,and in last you have to put button and make hole.

Your Princess cut blouse is ready!

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

Cutting and Stitching of Princess Cut Dress?

Cutting and Stitching of Princess Cut Dress?

Measurements for kameez:
1:-Length: (Shoulder to knee or as per your wish) +2inch
2:-Breadth: (Chest circumference) +4inch
3:-Shoulder: (Shoulder to Shoulder) +2inch
4:-Neck: Front neck 5inch or as per your wish
               Back neck 3inch or as per your wish
5:-Sleeve: (Shoulder to as per your wish)+2inch, Sleeve circumference +1inch

Now we will start cutting,
For prevention side first do the cutting on paper then on the cloth.
Step 1:-Take the measurements and do the marking and cutting.
Step 2:-Now take this paper, arrange it on your cloth, do the marking and cutting of it.

Stitching

Step 3:- Seeing the figure first stitch all three front pieces and  three back side pieces.

Step 4:- Now prepare neck side, you have to put paipin on both the neck side.

Step 5:- Join both the shoulder sides.

Step 6:- Next you have to join the sleeves. For joining the sleeves first fold or do the hemming work on the sleeve circumference and attach the sleeves.

Step 7:- Now fold dress from the bottom side.

Congratulations:- Your kameez is ready!

Measurement of salwar:-
1:-  Length(waist to ankle) +4inch
2:-  First divide the measurement of length in 2 parts
      1-upper part (waist to hip) 5inch +2inch (if you are fat then take 8 to 10inch)
      2-Lower part (hip to ankle) +2inch

3:- Waist +6 divide by 4
4:- Lower part hip+8 inch.

Cutting&Stitching:
Seeing the figure do the marking and the cutting of the cloth.

First fold bottom side 1and 1/2 inch and stitch.
Waist side fold 1inch for inserting a dori,.
Next make the frill on hip side(where you have taken  8inch extra).
Now join both the lower parts separately and join the centre piece.

Congratulations:-Your Salwar is ready!

ing

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. 

Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

How to Stitch Princess Cut Dress?

How to Stitch Princess Cut Dress?

Measurements for kameez:
1:-Length: (Shoulder to knee or as per your wish) +2inch
2:-Breadth: (Chest circumference) +4inch
3:-Shoulder: (Shoulder to Shoulder) +2inch
4:-Neck: Front neck 5inch or as per your wish
               Back neck 3inch or as per your wish
5:-Sleeve: (Shoulder to as per your wish)+2inch, Sleeve circumference +1inch

Now we will start cutting,
For prevention side first do the cutting on paper then on the cloth.
Step 1:-Take the measurements and do the marking and cutting.
Step 2:-Now take this paper, arrange it on your cloth, do the marking and cutting of it.

Stitching

Step 3:- Seeing the figure first stitch all three front pieces and  three back side pieces.

Step 4:- Now prepare neck side, you have to put paipin on both the neck side.

Step 5:- Join both the shoulder sides.

Step 6:- Next you have to join the sleeves. For joining the sleeves first fold or do the hemming work on the sleeve circumference and attach the sleeves.

Step 7:- Now fold dress from the bottom side.

Congratulations:- Your kameez is ready!

Measurement of salwar:-
1:-  Length(waist to ankle) +4inch
2:-  First divide the measurement of length in 2 parts
      1-upper part (waist to hip) 5inch +2inch (if you are fat then take 8 to 10inch)
      2-Lower part (hip to ankle) +2inch

3:- Waist +6 divide by 4
4:- Lower part hip+8 inch.

Cutting&Stitching:
Seeing the figure do the marking and the cutting of the cloth.

First fold bottom side 1and 1/2 inch and stitch.
Waist side fold 1inch for inserting a dori,.
Next make the frill on hip side(where you have taken  8inch extra).
Now join both the lower parts separately and join the centre piece.

Congratulations:-Your Salwar is ready!

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. 

Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

Cutting and Stitching of Rectangle poncho?

Cutting and Stitching of Rectangle poncho?

Stitching a Rectangle poncho is very easy.
Requirements:-
A nice cloth piece of 1 metre
Lace as required(optional)

Folding and Marking:-
Seeing the figure do the folding. Do the Shoulder to Shoulder marking. come 7inches down from the shoulder side then mark straight till bottom. At the neck side do the marking of 3inch (for a child of  more then 10 years, otherwise 2and 1/2 inch) Seeing the figure do the marking of the rectangle shape.

Stitching:-
(Kindly refer to the figure for stitching.) First do the folding from the bottom side. At the neck side folding in or hemming work can do. At the corners stitch the lace.
Congratulations:-
Your Rectangle poncho is ready.

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras

Institute of Tailoring.

Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

How to stitch Rectangle poncho?

How to stitch Rectangle poncho?

Stitching a Rectangle poncho is very easy.
Requirements:-
A nice cloth piece of 1 metre
Lace as required(optional)

Folding and Marking:-
Seeing the figure do the folding. Do the Shoulder to Shoulder marking. come 7inches down from the shoulder side then mark straight till bottom. At the neck side do the marking of 3inch (for a child of  more then 10 years, otherwise 2and 1/2 inch) Seeing the figure do the marking of the rectangle shape.

Stitching:-
(Kindly refer to the figure for stitching.) First do the folding from the bottom side. At the neck side folding in or hemming work can do. At the corners stitch the lace.
Congratulations:-
Your Rectangle poncho is ready.

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras

Institute of Tailoring.

Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.