Step by Step Cutting and Stitching of Katori Blouse with Deep Dori Neck (back side).
You have to follow this are steps:-
For stitching blouse you have mark on the paper and cut it, and this paper keep up side of the cloth and you have to cut.
A = Length (Shoulder to Waist) + 2 in
B = Breadth (Chest Circumference + 6 in) divided by 4
C = (Shoulder +2 in) divide by 2
D = Front Neck 5 in or as required, back neck 6 in or as required
E = 3 to 3.5 in
F = E-1.25 in (Max 1.5 in)
G = Sleeve Length + 2 in
H = Sleeve Circumference + 2 in
Step 1:- First do the marking on the paper and cut it.
Step 2:- Now you have to fold your cloth and keep it on the cloth mark and cut it.when you will cut the paper one piece you have to make it big (see the figure).This one piece you have to use for cutting.
Step 3:- First take your back side piece seeing the figure do the cutting back neck, now take the cross piece and make the loop and dori. Now stitch back side 4inch bottom to up side(bottom side 1/2inch and up side should be 0) cross stitch. Seeing the figure and put there paipin and make a loop and stitch there then make one dori which one you have to insert that one loop which one you stitch on your back side neck seeing the figure and insert your dori. Now you have keep it this piece separate.
Step 4:- Take your sleeve and fold courner side 1inch and keep it separate.
Step 5:- Now take your piece no.1 and do it cross stitch(2and 1/2 inch to 0).Then see the figure and attach with piece no.2, now bottom side attach piece no.3, next you have to attach button belt right side and button hole belt left. First keep this belt out side and stitch then turn belt inside and again stitch. Now you have to join both the shoulder and both the sides.
Step 6:- Now you have to make a belt which one length should be accourding to your waist and breadth should be 2inch, this one belt you have to attach with your blouse waist side, first stitch out side and fold cloth inside and again stitch.
Step 7:- Now you have to mark inside your blouse according to your waist and chest measure, and stitch it.
Step 8:- Next you have to join your sleeve.
Step 9:- Now you have to take cross piece length is according to your neck +1inch and breadth is 3/4inch.This piece you have to attach with your blouse neck side paipin (first you have to stitch out side and fold inside and again stitch) now make two doris whose breadth should be 3/4inch and length should be 10inch. Now seeing the figure attach the shoulder side.
Step 10:- Now attach button or hunk and make a hole.
Your blouse is ready!
.png)
.png)
.png)
You have to follow this are steps:-
For stitching blouse you have mark on the paper and cut it, and this paper keep up side of the cloth and you have to cut.
A = Length (Shoulder to Waist) + 2 in
B = Breadth (Chest Circumference + 6 in) divided by 4
C = (Shoulder +2 in) divide by 2
D = Front Neck 5 in or as required, back neck 6 in or as required
E = 3 to 3.5 in
F = E-1.25 in (Max 1.5 in)
G = Sleeve Length + 2 in
H = Sleeve Circumference + 2 in
Step 1:- First do the marking on the paper and cut it.
Step 2:- Now you have to fold your cloth and keep it on the cloth mark and cut it.when you will cut the paper one piece you have to make it big (see the figure).This one piece you have to use for cutting.
Step 3:- First take your back side piece seeing the figure do the cutting back neck, now take the cross piece and make the loop and dori. Now stitch back side 4inch bottom to up side(bottom side 1/2inch and up side should be 0) cross stitch. Seeing the figure and put there paipin and make a loop and stitch there then make one dori which one you have to insert that one loop which one you stitch on your back side neck seeing the figure and insert your dori. Now you have keep it this piece separate.
Step 4:- Take your sleeve and fold courner side 1inch and keep it separate.
Step 5:- Now take your piece no.1 and do it cross stitch(2and 1/2 inch to 0).Then see the figure and attach with piece no.2, now bottom side attach piece no.3, next you have to attach button belt right side and button hole belt left. First keep this belt out side and stitch then turn belt inside and again stitch. Now you have to join both the shoulder and both the sides.
Step 6:- Now you have to make a belt which one length should be accourding to your waist and breadth should be 2inch, this one belt you have to attach with your blouse waist side, first stitch out side and fold cloth inside and again stitch.
Step 7:- Now you have to mark inside your blouse according to your waist and chest measure, and stitch it.
Step 8:- Next you have to join your sleeve.
Step 9:- Now you have to take cross piece length is according to your neck +1inch and breadth is 3/4inch.This piece you have to attach with your blouse neck side paipin (first you have to stitch out side and fold inside and again stitch) now make two doris whose breadth should be 3/4inch and length should be 10inch. Now seeing the figure attach the shoulder side.
Step 10:- Now attach button or hunk and make a hole.
Your blouse is ready!
Keep your cut paper pieces on the cloth,draw,cut and stitch.
Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.
No comments:
Post a Comment