Step by Step Cutting and Stitchng Dori and Loops for blouse.

Step by Step Cutting  Stitching Dori and Loops for blouse.

Stitching a dori for the blouse is very simple.

Step 1: First take the cross pieces of your blouse piece.
Step 2: Now cut these pieces and seeing the figure join them. Now you will get a long cloth.
Step 3: Now fold the cloth and make a stitch.
Step 4: Now turn the cloth piece inside out.

Congratulations! Your Dori and Loops is ready!

1. Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog must not be used for commercial purposes or for publishing in other electronic media purposes.

Step by Step Cutting and Stitching dori for blouse.

Step by Step Cutting and Stitching dori for blouse.

Stitching a dori for the blouse is very simple.

Step 1: First take the cross pieces of your blouse piece.
Step 2: Now cut these pieces and seeing the figure join them. Now you will get a long cloth.
Step 3: Now fold the cloth and make a stitch.
Step 4: Now turn the cloth piece inside out.

Congratulations! Your Dori is ready!

1. Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog must not be used for commercial purposes or for publishing in other electronic media purposes.

Step by Step Citing and Stitching Katori Blouse with Frill Neck & Frill Sleeve.

Step by Step Citing and Stitching Katori Blouse with Frill Neck & Frill Sleeve.

First take the following measures:

A = Length (Shoulder to Waist) + 2 in
B = Breadth (Chest Circumference + 6 in) divided by 4
C = (Shoulder +2 in) divide by 2
D = Front Neck 5 in or as required, back neck 6 in or as required
E =  3 to 3.5 in
F =  E-1.25 in (Max 1.5 in)
G = Sleeve Length + 2 in
H = Sleeve Circumference + 4 in

Step 1:- First do the marking on the paper and do the cutting of it. Now take your back side paper piece and from centre side cut the paper seeing the figure and add 6 inch for frill. Now you take this piece and see the figure for how to make the frill, first you have to big stitch on full cloth next make zigzag and then pull your big one stitch thread and make knot there. Now this piece should be same which one you cut it from back side. Now join the cloth and put paipin seeing the figure.

Step 2:- Now fold your cloth and keep it on the cloth mark and cut it. while cutting the paper make one piece big (see the figure). This piece you have to use for cutting.

Step 3:- First you take your back side piece see the figure and cut do the frill on back neck, now take the cross piece and make the paipin and join it. Now you have to stitch back side 4inch bottom to up side(bottom side 1/2inch and up side should be 0) cross stitch, and keep it this piece separate.

Step 4:- Take your sleeve and do the frill seeing the figure fold courner side 1inch and keep it separate.

Step 5:- Now take your piece no.1 and do it cross stitch(2and 1/2 inch to 0).Then see the figure and attach with piece no.2, now bottom side attach piece no.3, next you have to attach button belt right side and button hole belt left.First keep this belt out side and stitch then turn belt inside and again stitch. Now you have to join both the shoulder and both the sides.

Step 6:- Now you have to make a belt which one length should be according to your waist and breadth should be 2inch, this one belt you have to attach with your blouse waist side, first stitch out side and fold cloth inside and again stitch.

Step 7:- Now you have to mark inside your blouse according to your waist and chest measure, and stitch it.

Step 8:- Next you have to join your sleeve.

Step 9:- Now you have to take cross piece length is according to your neck +1inch and breadth is 3/4inch.This piece you have to attach with your blouse neck side paipin (first you have to stitch out side and fold inside and again stitch) now make two doris whose breadth should be 3/4inch and length should be 10inch. Now seeing the figure attach the shoulder side.

Step 10:- Now attach button or hunk and make a hole.
Your blouse is ready!

       Keep your cut paper pieces on the cloth draw,mark and cut it.

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

Step by Step Cutting and Stitching Simple Top.

Step by Step Cutting and Stitching Simple Top.

First you have to take your measurement

Length: Shoulder to knee (or as long as your wish) +2inch
Breadth: Chest circumference+4inch
Front neck: 4and 1/2 inch or as long as your wish
Back neck: 3inch or as long as your wish for the design
Sleeve length: 5inch or your wish.
Sleeve circumference (shoulder side): Chest circumference divided by 4 -1/2 inch.
Sleeve circumference +1inch.

Now do the marking and the cutting of your cloth.
(If your chest is 34 to 38 you need 1and 1/2 metre cloth.)
Take your cloth fold twice seeing the figure.

Now do the marking and the cuttng of your cloth.

Next fold bottom side1/2inch, sleeve corners fold 1/2inch.

Now fold neck side or put paipin and join shoulder side, Next join sides and now at last join the sleeves.

Now your top is ready!

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

Step by Step Cutting and Stitching of Skirt.

Step by Step Cutting and Stitching of Skirt.

MEASUREMENT

Step1-:Firstly we will take the following measures-

A-: Length(waist to ankle) add 2 inch

B-: Measure (Waist )+15 divided by 2

If measure of our A is 18inch, we will add 2inch. So we will take 20 inch long cloth. And if our waist is 21 inch. We will add 15 and divide it by 2, so we get 18 (21+15=36/2=18). So breadth of the cloth should be 18 inch.

MARKING AND CUTTING

Step2-:Now we will mark the cloth according to the drawing.There is one exact line also you have to draw your stitching line.

STITCHING

Step3-: Start stitcthing from waist side. Fold 1and 1/2 inch for Rope or elastic. Fold 1/2 inch from downside.

Now you have to stitch the sides.
Your skirt is ready.

 

 Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

Step by Step Cutting and Stitching of Different Front & Back Colour Katori Blouse.

Step by Step Cutting and Stitching of Different Front & Back Colour Katori Blouse.

For 34/36 inch chest take two colours of cloth of 60cm. (front piece and sleeve) and 40cm.(back piece and paipin).

For stitching blouse first do the marking and the cutting on a paper. And use this paper for keeping on the cloth and cutting it.

A = Length (Shoulder to Waist) + 2 in
B = Breadth (Chest Circumference + 6 in) divided by 4
C = (Shoulder +2 in) divide by 2
D = Front Neck 5 in or as required, back neck 6 in or as required
E =  3 to 3.5 in
F =  E-1.25 in (Max 1.5 in)
G = Sleeve Length + 2 in
H = Sleeve Circumference + 2 in

Step 1:- First do the marking and cutting on a paper. Take two paper pieces according to the blouse.

Step 2:- Now fold your cloth and keep it on the cloth and do the marking and cutting of it (you have to take 60cm piece and cut front piece). For back piece and half sleeves you have to use 40cm piece.

Step 3:- First take your back side piece seeing the figure do the cut and join three piece

Step 4:- Take your paper cut sleeve and see the figure and cut into two colour. Now you have to join three pieces, fold courner side 1inch and keep it separate.

Step 5:- Now take your piece no.1 and do it cross stitch(2and 1/2 inch to 0).Then see the figure and attach with piece no.2, now bottom side attach piece no.3, next you have to attach button belt right side and button hole belt left. First keep this belt out side and stitch then turn belt inside and again stitch. Now you have to join both the shoulder and both the sides.

Step 6:- Now you have to make a belt which one length should be according to your waist+1inch and breadth should be 2inch, this one belt you have to attach with your blouse waist side, first stitch out side and fold cloth inside and again stitch.

Step 7:- Now you have to mark inside your blouse according to your waist and chest measure, and stitch it extra inch.

Step 8:- Next you have to join your sleeve.

Your blouse is ready!

                  Keep your paper pieces on the cloth piece and do the marking and cutting of the cloth piece.

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

Step by Step Cutting and Stitching a pouch for small things.

Step by Step Cutting and Stitching a pouch for small things.

The things you need are:-
1:-1metre cloth
2:-1metre canvas cloth
3:-3 metre lace

First cut 1/4 metre cloth and 1/4 metre canvas cloth and join all sides now stitch all side lace and keep it separate.

 Now cut 5 inch by 5 inch of cloth and canvas 5 pieces. Join all pieces and prepare 5 pieces.

 Now attach all pieces on your big cloth piece.

 Now stitch the lace.

Your Small Pouch is ready!

 Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

Step by Step Cutting and Stitching of Simple jacket of 1year baby.

Step by Step Cutting and Stitching of Simple jacket of 1year baby.

First you have to take measure according to:-

STEP1-: Length(shoulder to waist)+2inch
STEP2-: Breadth(chest circumference) +4inch divide by 4,
STEP3-: Shoulder to shoulder +1inch.

         Now start marking and cutting seeing the figure.

You take this piece and take other cloth for inside mark and cut it. Seeing the figure and stitch it.

 Do not stitch bottom side, you have to turn from that side.

Now again stitch and fold bottom inside.

Your Simple jacket is ready!

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

Step by Step Cutting and Stitching of Bloomer.

Step by Step Cutting and Stitching of Bloomer.

STEP1-: First take the measures according to:
               length:   Side length (waist to as long as you need)+2 inch.
               breadth: Waist+10 inch divided by 4.
               Bottom side circumference+1inch.

               *If your age is more then 10 years then you have to mark 2and 1/2 inch.
                Otherwise 1and1/2inch.*(see this mark in figure)

STEP2-: Seeing the figure,cut the cloth.

STEP3-: Now fold1/2 inch from bottom side .

 Next fold waist side 1 inch(for inserting  an elastic).

 Now join both the pieces.

 Your Short is ready!

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

Step by Step Cutting and Stitching of Short.

Step by Step Cutting and Stitching of Short.

STEP1-: First take the measures according to:
               length:   Side length (waist to as long as you need)+2 inch.
               breadth: Waist+10 inch divided by 4.
               Bottom side circumference+1inch.

               *If your age is more then 10 years then you have to mark 2and 1/2 inch.
                Otherwise 1and1/2inch.*(see this mark in figure)

STEP2-: Seeing the figure,cut the cloth.

STEP3-: Now fold1/2 inch from bottom side .

 Next fold waist side 1 inch(for inserting  an elastic).

 Now join both the pieces.

 Your Short is ready!

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

Step by Step Cutting and Stitching of puff sleeves.

Step by Step Cutting and Stitching of puff sleeves.

Seeing the figure do the marking and the cutting of the cloth.

1:-First you cut your size of sleeve on the paper, then take the paper and keep it on your cloth and mark on it. Both the sides take 3inch extra from shoulder side and sleeve circumference sides both the sides +2inch.

2:-Now make frill on both the sides.

3:-Next sleeve circumference side you have to put the belt.

How to stitch belt?

1:-First take the cloth piece of length is according to your sleeve circumference +1inch and breadth is 3inch.

2:-Seeing the figure make and join this belt, Insert an elastic of 1/2inch breadth.

3:-Now join this belt on your dress or top.

Your puff sleeve is ready!

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

Step by Step Cutting and Stitching of long dori neck and long dori sleeve in Salwar-suit.

Step by Step Cutting and Stitching of long dori neck and long dori sleeve in Salwar-suit.

Measurement of Kurti-
             Length(shoulder to Knee)+2inch
             Shoulder +1inch
             Breadth(chest circumference)+6 divided by 4
             Front neck 5inch or as long as your wish
             Back neck 3inch or as long as your wish
             Sleeve length +2inch,
             Sleeve circumference +2inch, (sleeve arm side will be chest circumference divided by 4 -1)

 Now seeing the figure do the marking and the cutting of the cloth.

 First fold bottom side 1/2inch, at the sides also fold inside 1/2inch.

 How to stitch Long Dori Sleeve?

Seeing the figure and cut the cloth and join a small loop.

How to stitch Long Dori Sleeve and make a loop?

First you have to take cross pieces of 1inch breadth cloth and 12 inch long.

You have to fold and make it half inch breadth and stitch, after stitching you have to turn the cloth piece now cut 1and1/2 inch small pieces seeing the figure join your loop is ready.

Now make a same dori length should be according to your sleeve length into 2.

Now seeing the figure insert your dori, then attach the sleeves on your dress.

Your kurti is ready!

Measurement of salwar:-

          Length(waist to ankle) +4inch
          First divide the measurement of length in 2 parts:
                     1-upper part waist to hip 5inch +2inch (if you are fat then take 8 to 10inch)
                     2-Lower part hip to ankle +2inch
          Waist +6 divide by 4
          Lower part hip+8 inch.
    Seeing the figure do the marking and the cutting of the cloth.

            First fold bottom side 1and  1/2 inch, waist side fold 1inch for inserting a dori, Next make the frill on hip side(where you have taken  8inch extra), Now join both the lower parts separately and join the centre piece.

Your Salwar is ready!

Now stitch Back side Doori Neck?

First take your back side part of the neck. Seeing the figure do the cutting and make the loop and cut 1inch small size then join small loop.

How to make a loop?

First take cross pieces of 1inch breadth cloth and 12 inch long.

Now fold and make it half inch breadth and stitch, after stitching turn the cloth piece.

Now cut 1inch small pieces seeing the figure join it and your loop is ready.

Now you have to make it same dori length should be accourding to your back length how much you cut into 2.

Now seeing the figure insert your dori, then attach the cloth part on your dress or anywhere you like.

Your Back side dori neck is ready!

Your salwar kurti is ready!

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

Step by Step cutting and stitching Vegetable Cover for a Fridge.

Step by Step cutting and stitching Vegetable Cover for a Fridge.

STEP1-: First you have to buy a 1/2 metre cloth of net.

STEP2-: Seeing the figure fold your cloth.

STEP3-: Now stitch all the three sides. Keep one side open where you have to stitch a zip or you fold 1/2 inside and insert a rope.

Your vegetable fridge cover is ready!

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

Step by Step Cutting and Stitching of Different Front & Back Colour Katori Blouse.

Step by Step Cutting and Stitching of Different Front & Back Colour Katori Blouse.

For 34/36 inch chest take two colours of cloth of 60cm. (front piece and sleeve) and 40cm.(back piece and paipin).

For stitching blouse first do the marking and the cutting on a paper. And use this paper for keeping on the cloth and cutting it.

A = Length (Shoulder to Waist) + 2 in
B = Breadth (Chest Circumference + 6 in) divided by 4
C = (Shoulder +2 in) divide by 2
D = Front Neck 5 in or as required, back neck 6 in or as required
E =  3 to 3.5 in
F =  E-1.25 in (Max 1.5 in)
G = Sleeve Length + 2 in
H = Sleeve Circumference + 2 in

Step 1:- First do the marking and cutting on a paper. Take two paper pieces according to the blouse.

Step 2:- Now fold your cloth and keep it on the cloth and do the marking and cutting of it (you have to take 60cm piece and cut front piece). For back piece and half sleeves you have to use 40cm piece.

Step 3:- First take your back side piece seeing the figure do the cut and join three piece.

Step 4:- Take your paper cut sleeve and see the figure and cut into two colour. Now you have to join three pieces, fold courner side 1inch and keep it separate.

Step 5:- Now take your piece no.1 and do it cross stitch(2and 1/2 inch to 0).Then see the figure and attach with piece no.2, now bottom side attach piece no.3, next you have to attach button belt right side and button hole belt left. First keep this belt out side and stitch then turn belt inside and again stitch. Now you have to join both the shoulder and both the sides.

Step 6:- Now you have to make a belt which one length should be according to your waist+1inch and breadth should be 2inch, this one belt you have to attach with your blouse waist side, first stitch out side and fold cloth inside and again stitch.

Step 7:- Now you have to mark inside your blouse according to your waist and chest measure, and stitch it extra inch.

Step 8:- Next you have to join your sleeve.

Your blouse is ready!

                  Keep your paper pieces on the cloth piece and do the marking and cutting of the cloth piece.

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.

Step by Step Cutting and Stitching of Chaniya Choli.

Step by Step Cutting and Stitching of Chaniya Choli.

For 10 year baby you have to take the 3 meter long cloth.

STEP1-: First take the measures of Chaniya & Choli:

Measures for Choli:- 
A = Length (From Shoulder to Waist) + 2 in
B = Breadth(Chest circumference ) + 2 in
Front neck: 4 in
Back neck: 2 in
Shoulder = Shoulder to Shoulder + 2 in dived by 2

Measures for the Chaniya:-
Chaniya Waist Size = Actual Waist Size + 2 in
Chaniya Length = Length (From Waist to Ankle)  + 4 in

Measure for the sleeves:- See the figure.

STEP2-: Seeing the figure, mark and cut the cloth.

Choli Stitching:
First fold 1/2 in from both the sides. Next join both shoulder pieces.Seeing the figure join a paipin on front neck and back neck. Now join both the sides,Now attach the sleeves.
Your Choli is ready!          

Chaniya Stitching:
Seeing the figure fold 1 in from bottom side. Now fold waist side 2 in (insert a dori). Now join the sides.
Your Chaniya is ready!

Congratulations!!! Your Chaniya Choli is ready!!!

Author: Mrs. Bhawna Gupta is a professional tailor for ladies dresses (Indian Blouse, Chudidar, Salwar Suit, Maxi, Frock, Kids Skirts, Tops etc) over more than a decade. She had completed the Advanced Diploma in Tailoring from Madras Institute of Tailoring. Disclaimer - This BLOG is published for learning purpose. Author has no liability for any damage or loss. This blog cannot used for commercial, publishing in other electronic media purposes.